Menu

Gripping Force Meter SKM 1200 and SKM 1500

Accessories
Extension pieces can be mounted to the head of the FORKARDT SKM meters using combinations of tension and compression bolts. Chucking diameters of 63 to 293 mm (SKM 1200) and 114 to 544 mm (SKM 1500) can be accommodated (in 10 mm intervals).
One of the tension or compression bolts must always be screwed into the matching hole on top of the measuring head (when viewed with display side up). The measuring sensor is located at this position in the measuring (the joint is recognisable). The remaining tension or compression bolts should be positioned appropriately according to the number of jaws.
SKM 1200
SKM 1500
System M6
3 pieces each
Length
1 [mm]
Ident-No
System M12
3 pieces each
Length
1 [mm]
Ident-No
Tension bolt
4
D164809020
Tension bolt
5
D164814020
Tension bolt
9
D164809021
Tension bolt
10
D164814021
Tension bolt
14
D164809022
Tension bolt
15
D164814022
Tension bolt
20
D164814023
Compression bolt
15
D164809025
Compression bolt
20
D164814025
Compression bolt
30
D164809026
Compression bolt
40
D164814026
Compression bolt
60
D164809027
Compression bolt
80
D164814027
Compression bolt
160
D164814028
2 Spanners (gauge 12)
2 Spanners (gauge 22)
Carry-case, main adapter
Carry-case, main adapter

Tension and compression bolts may be re-ordered from FORKARDT as follows:

• SKM 1200 1 set of tension and compression bolts ident-no. D300224003
• SKM 1500 1 set of tension and compression bolts ident-no. D300229003
Accessories
( Products | News | About Forkardt | Contact | Overview | Homepage )

FORKARDT INTERNATIONAL - an ITW WORKHOLDING company