Menu
Sprache

2 BLN Power Chucks
Power operated two jaw wedge hook chucks

Two jaw chucks are predominantly used when machining irregular shaped components and are therefore mainly used with workpiece specific jaws. When machining fittings or similar parts, it is often necessary to grip over projections. Also ball shaped parts must be
enveloped by the jaws. This necessitates a relatively long jaw stroke.

The FORKARDT 2BLN chucks are designed to match these production requirements perfectly. The jaw slides and all moving internal parts are made from high alloy steel and hardened to ensure a long service life. As with three jaw chucks, the top jaws of the 2BLN chuck are located on serrations and can easily be adjusted or changed. The base jaws of the chuck have lubrication facilities and the chuck body is recessed to reduce weight.

The top jaws are generally specially made to match
the workpiece. Two-jaw chucks without rapid traverse
for internal and external chucking are available on request.

Technical Data:
2BLN 125
Ident-No.: D154890000
2BLN 160
Ident-No.: D154891000
2BLN 200...400

LK = Pitch circle
SK = Outer most

 


brochure in PDF format
(253 KB)

( Products | News | About Forkardt | Contact | Overview | Homepage )
 
send eMail FORKARDT INTERNATIONAL
C/O Forkardt Deutschland
Postbox 34 42
D-40684 Erkrath
Phone:
Fax:
eMail:
(+49)-211 / 25 06-0
(+49)-211 / 25 06-2 21
info@forkardt.com
www.forkardt.com
 
FORKARDT INTERNATIONAL - an ITW WORKHOLDING company